Pages

September 2, 2012

Umbrella for my Ganesha (recycle craft)

Got so bored staying away from system.....so engaged myself in a small project. A nice umbrella

Another DIY project.....it may sound complicated at certain point but it is easy if you have a glue gun. Glue gun makes the project very easy.

After reading about glue gun my search started and it went for months n months........... finally got it in hypercity and here is my first project using glue gun.

My gift for my favourite deity for his birthday



You will need :-

  1. carton box (I used the one in which Vanish stain remover comes)
  2. Glue Gun
  3. Corn pith (comes with kulfi)- 1No.
  4. Tooth pick - 2 nos.
  5. Metal Bangle - 1 No.
  6. Thermocol piece to support the stick
  7. Some Zari or lace
  8.  colours & glitters to colour your umbrella
  9. Thermocol balls - few (I had saved some after using for an occasion)
  10. Scissor, Pencil
Procedure :- 

  • Wind a lace to cover the bangle (I crocheted SCs around it using glitter thread)
  • Cut a piece of round shape out of the cardboard or carton box 
 
  • Cut little less than a quarter of the circle as shown in the picture.

  • Apply glue to one end and stick the other one overlapping that slightly.
 
 
  •  Allow it to set completely say for a minute
  • Then colour it with your favourite colours. I first painted it with white acrylic colour, then mixed some glitter powder into some glue and applied it. over that I used some glass colours I had & made a simple design. You can use kundan stones, chamkis.
  • Place the Zari or lace & stick it all around as shown in the picture using glue gun (as it dries fast)
  • Then using thermocol balls I decorated it

  •  I used corn pith as toothpick can be easily inserted into it. So I first pierced the toothpicks lightly then removed it, applied glue to the sharp end of the toothpick and fixed it in the hole made. Like that have to fix another toothpick too to give support to the top portion. As shown in the next two pictures. (this may sound complicated but easy to make)


  •  Now attach a thermocol piece the same way as we did for toothpick. Pierce, remove, apply glue and again set it in the hole made to make it sturdy.
  • stick the thermocol to the prepared bangle as shown in the picture. (I split one end of thermocol piece, applied glue and inserted the bangle lightly into it). To make it clear to you i have shown a plain bangle.

  

 



  •  I slipped the bangle stand around him, which you cannot see in the picture because of the satin ribbon work adorning him. so concealed. 
  • Here is my Ganesha under the shade........ getting geared up for his birthday isn't it?

12 comments:

  1. Dear Mira
    Very lovely craft ... I too will make one for my Ganapa too Please post picture of the glue gun you have bought

    ReplyDelete
  2. lovely umbrella for ganeshji..thanks for the procedure..

    ReplyDelete
  3. Mira dear

    Wow awesome. Ganeshji is lucky to have this umbrella made by you

    ReplyDelete
  4. Hi VJB, will try to post. But you can google and get an idea on that. Thank you.

    Thank you Ranjana, Shama, Leela chechi, Viji mami :)-)

    ReplyDelete
  5. Excellent work Mira !
    Congrats !!
    Thanks for sharing !!!

    மிகவும் ஜோராக உள்ளது ;)))))

    ReplyDelete
  6. Thank you Raji, Gopu Sir, Anitha

    ReplyDelete
  7. Thankyou so much i was looking for making an umbrella it wll help me so much

    ReplyDelete

Thank You Very Much for taking time to come here and adding your comment! It means a lot to me! :)